DOCUMENT No.:
REVISION: 1.2
DATE: 2014/11/10
DC-MAM-001-X-C-2
Page 226
PROCEDURE (REMOVAL)
Retain any bolts, clamps, spacers, screws and washers (with the exception of lock-washers)
for reassembly.
1.
Access is gained to the unit from behind and below the instrument panel. Removing
the centre console side inspection panel might ease access.
2.
Pull / raise the safety button (1) to reveal the screw (2) retaining the selector lever (3)
to the selector valve unit. Loosen the screw and remove / slide off the lever.
3.
Loosen the four button head screws (4) retaining the plate (5) to the selector unit.
Push the unit towards the nose of the aircraft to expose (fuel pipe flexibility should
allow this) and remove the fuel
pipes from the unit’s fittings, by removing the two-ear
clamps (refer to paragraph 15.1) retaining the pipes to the selector unit. Alternatively
gain access to the fittings via the centre console side inspection panels.
4.
Blank off the fuel pipes if to be unconnected for an extended time.
1
2
3
4
4
4
4
5
Summary of Contents for Sling 4
Page 1: ......