DOCUMENT No.:
REVISION: 1.2
DATE: 2014/11/10
DC-MAM-001-X-C-2
Page 100
PROCEDURE (REMOVAL)
Retain any bolts, nuts (except lock-nuts) spacers, screws and washers (with the exception of lock-
washers) for reassembly.
1.
Remove the pilot seat (refer to paragraph 4.3.2.1).
2.
Remove
the central side panel under the instrument panel (next to pilot’s legs / calves) to gain
access to the flap actuator motor’s signal cable plug. Disconnect the plug. Remove tie wraps
where necessary.
3.
Remove the central console panel (next to the front seat) by loosening the button head screws
retaining it.
4.
Open the rear panel of the centre console by unscrewing the button head screws retaining it.
5.
Support the flap actuator motor (1) and undo the bolts (2) retaining the motor to the forward
fuselage bracket (3) and the flap torque tube (4) control arm (5). Be aware that the flaps will
fall / rotate down unless supported.
Figure 20: Flap actuator motor removal.
1
2
2
4
5
2
1
5
1
2
3
3
Summary of Contents for Sling 4
Page 1: ......