DOCUMENT No.:
REVISION: 1.2
DATE: 2014/11/10
DC-MAM-001-X-C-2
Page 177
4.
Release the four catches (4), one on each side of the coolant (5) and oil radiators (6). Also
refer to Figure 43.
5.
Support the cowl and remove the six Dzus fasteners located around the firewall and on the
bracket behind the nose wheel strut.
6.
Carefully move the cowl free from the aircraft.
PROCEDURE (INSTALLATION)
BOTTOM COWL:
1.
Reverse the above procedure (removal) to install the bottom cowl, paying close attention to the
following:
Ensure that the four catches (next to the radiators) are properly latched.
Tighten the clamp securing the air filter inlet pipe to the cowl air inlet sufficiently, but do not
over tighten, as this may damage the cowl fibreglass inlet.
TOP COWL:
1.
Fit the bottom cowl.
2.
Reverse the above procedure (removal) to install the top cowl. Ensure that the radiators and
filter air supply pipe are properly connected before closing up the engine compartment.
4
4
5
6
1
6
1
Summary of Contents for Sling 4
Page 1: ......