DOCUMENT No.:
REVISION: 1.2
DATE: 2014/11/10
DC-MAM-001-X-C-2
Page 208
5.3.5
PROPELLER REMOVAL / INSTALLATION
TOOLS / EQUIPMENT REQUIRED
ITEM
QUANTITY
NOTES
1
Calibrated torque wrench, minimum range of at least 25 Nm.
1
Installation.
2
½ inch Hex socket (to fit item 1).
1
Installation.
3
13 mm Hex socket (to fit item 1).
1
Installation.
4
½ inch Spanner.
1
Removal.
5
13 mm Spanner
1
Removal.
6
Socket wrench to fit items 2 and 3.
1
Alternative to items 4 and 5.
The above list is not necessarily a complete list of all required tools and equipment needed. A calibrated torque
wrench (with adequate range) and the correct size (as implied by the above tool list) accessories (sockets etc.)
are implied for torqueing bolts / nuts, if applicable. Refer to paragraph 1.5 for torque values.
CONSUMABLE MATERIAL REQUIRED
ITEM
QUANTITY
NOTES
1
Orange paint.
As needed.
2
Loctite 243.
As needed.
Bolts connecting propeller extension and engine flange.
3
Loctite 222.
As needed.
Bolts connecting propeller extension and propeller assembly / hub.
The above list is not necessarily a complete list of all material needed. Refer to the Sling 2 construction manual.
AUTHORISED PERSONNEL
Any person performing maintenance of any kind on the aircraft or any component thereof must do so in
accordance with national legislation. This is the responsibility of the aircraft owner and any person who is to
perform any maintenance on the aircraft.
WARNING
MASTER / IGNITION SWITCHES OFF.
CAUTION
BE PREPARED WITH A HELPER OR SUPPORT STAND TO HANDLE THE WEIGHT
AND AWKWARDNESS OF THE OBJECT TO BE REMOVED.
Summary of Contents for Sling 4
Page 1: ......
