DOCUMENT No.:
REVISION: 1.2
DATE: 2014/11/10
DC-MAM-001-X-C-2
Page 289
PROCEDURE (REMOVAL)
Retain any bolts, nuts (except lock-nuts) spacers, screws and washers (with the exception of
lock-washers) for reassembly.
1.
Master switch in OFF position. Navigation lights switch in OFF position.
2.
Undo the button head screws retaining the navigation light to the wing.
3.
Carefully move the light away from the wingtip until the wire connection plugs are
revealed. Disconnect. Retain the rubber backing for reassembly.
PROCEDURE (INSTALLATION)
1.
Reverse the above procedure for reinstallation, paying close attention to the following:
Inspect all bolts, nuts and screws for damage. Replace if necessary.
Inspect the rubber backing for damage before fitting. Replace if necessary.
Apply thread locking sealant to the navigation light retaining screws before
fitment. Do not over tighten.
2.
Apply electrical power and verify correct operation of the lights.
Summary of Contents for Sling 4
Page 1: ......
