![background image](http://html1.mh-extra.com/html/micronwings/glider-dual-fuse-fox/glider-dual-fuse-fox_manual_1788095001.webp)
Glider Dual Fuse Fox
The Dual Fuse Fox is a fast looking modern dual fuselage design with swept back wings and sharp lines. The
main wing section is curved over ribs to give it a slight airfoil shape, and this is also reinforced by the shaped
wing root slots and tail boom supports. Balancing the glider is as simple as placing the ballast weight in the nose
cavity and you then have a very stable glider with slow to moderate flying speeds. The Dual Fuse Fox not only
looks great but has exceptional glide performance as well.
Your kit contains the following items
* Pre- cut parts
* Sandpaper sheet
* Diagram sheet
* Ballast weight
* Glue
Additional Items You May Need
* Cling Wrap
* Flat board (working surface)
* Hobby Knife
* Wood glue
* Masking tape
Build Procedure
Firstly it’s a good idea to tape down a sheet of cling wrap over
your work surface. This will stop the parts from becoming glued
to the surface. It’s easier to peel off cling wrap from any wooden
parts.
Note: although the kit is supplied with CA glue, we recommend
using other glues which are suitable for balsa wood if available.