Symantec Veritas Cluster Server One, Installation Manual

Page: 199 / 210

199 Response file variables
$CPI::CFG{VCSONEPM_LLTLINK#
} { SYSTEM }
2 dimen
scalar
Required. Defines the NIC to be used for
a private heartbeat link on each system.
Two LLT links are required per system
(LLTLINK1 and LLTLINK2). Up to four
LLT link can be configured.
$CPI::CFG{VCSONEPM_LLTLINKL
OWPRI} { SYSTEM }
2 dimen
scalar
Optional. Defines a low priority
heartbeat link. Typically,
LLTLINKLOWPRI is used on a public
network to provide an additional layer
of communication.
$CPI::CFG{VCSONEPM_PMDB_NE
TAPP}
1 dimen
scalar
Optional. Defines where to store the
database on NetApp export.
$CPI::CFG{VCSONEPM_PM_NET
MASK}
1 dimen list Required. Defines the list of netmasks
for each of the corresponding virtual
IPs.
$CPI::CFG{VCSONEPM_VCSONEP
MNIC MASK} {num} { SYSTEM }
2 dimen list Required. Defines the NICs for each of
the corresponding virtual IPs. If you use
the same NIC on all systems, enter
ALL
.
$CPI::CFG{VCSONEPM_PMDB_SF
CONFIG}
1 dimen
scalar
Optional. Designates that the installer
create the Storage Foundation
configuration; that is, it starts
processes, and creates and mounts the
disk group and volume.
$CPI::CFG{VCSONEPM_PMDB_SF
DSK}
1 dimen list Optional. Defines the disks that are part
of the disk group and volume.
$CPI::CFG{VCSONEPM_SFINSTAL
L}
1 dimen
scalar
Required. Designates that the
installation will install Storage
Foundation packages.
$CPI::CFG{VCSONEPM_PMDB_SF
VOLSIZE}
1 dimen
scalar
Optional. Defines the volume size the
installer will create for the disks
defined by
$CPI::CFG{VCSONEPM_SFDSK}.
$CPI::CFG{VCSONECD_SELINUX_
PERMISSIVE}
1 dimen
scalar
Optional. Specifies if SELinux changes
from enforcing mode to permissive
mode.
Table E-1 Response file variable definitions (continued)
Variable Dimension/
Type Definition