Symantec Veritas Cluster Server One, Installation Manual

Page: 169 / 210

169 Sample installation output
Installing the VCS One Policy Master with Storage Foundation
Only one IP address 10.198.95.243 is detected for NIC eth0 under
system redhat95243. This IP address will be set as the base IP.
Only one IP address 10.198.92.157 is detected for NIC eth0 under
system pilotvmred9. This IP address will be set as the base IP.
Enter one or more Virtual IPs separated by space for the Policy
Master: [b,q,?] 10.198.92.127 10.198.94.158
Checking the 10.198.92.127 virtual IP address ........... Not in use
Checking the 10.198.94.158 virtual IP address ........... Not in use
Enter the netmask for IP 10.198.92.127: [b,q,?] (255.255.248.0)
Enter the netmask for IP 10.198.94.158: [b,q,?] (255.255.248.0)
Confirming the Policy Master virtual IP address configuration
Veritas Cluster Server One 5.0.0 by Symantec
Policy Master configuration verification:
Virtual IP 1:
Virtual IP: 10.198.92.127
Netmask: 255.255.248.0
Virtual IP 2:
Virtual IP: 10.198.94.158
Netmask: 255.255.248.0
NIC(s) under redhat95243:
1: NIC - eth0; IP - 10.198.95.243
NIC(s) under pilotvmred9:
1: NIC - eth0; IP - 10.198.92.157
Is this information correct? [y,n,q] (y)
Choosing a storage architecture
Veritas Cluster Server One 5.0.0 by Symantec
VCS One PM should use shared storage for storing Configuration
Database
The following storage architectures are supported for storing VCS
One PM Configuration Database:
1. Storage Foundation -- One or more shared disks controlled by
Storage Foundation
2. NetApp filer -- Shared storage exported by a specified NetApp
filer server