Symantec Veritas Cluster Server One, Installation Manual, Page: 171 / 210

171 Sample installation output
Installing the VCS One Policy Master with Storage Foundation
eth0 : 10.198.92.157 : 255.255.248.0
eth1 : 192.168.100.101 : 255.255.248.0
eth2 : 192.168.100.102 : 255.255.248.0
Enter one or more Virtual IPs for VCS One PM disaster recovery:
[b,q,?] 10.200.58.209 10.200.58.210
Checking virtual IP address 10.200.58.209 ............... Not in use
Checking virtual IP address 10.200.58.210 ............... Not in use
Enter a nic for IP 10.200.58.209 on redhat95243: [b,q,?] eth0
Would you like to use the same NIC (eth0) on all PM nodes for IP
10.200.58.209? [y,n,q] (y)
Enter the netmask for IP 10.200.58.209: [b,q,?] (255.255.248.0)
Enter a nic for IP 10.200.58.210 on redhat95243: [b,q,?] eth0
Would you like to use the same NIC (eth0) on all PM nodes for IP
10.200.58.210? [y,n,q] (y)
Enter the netmask for IP 10.200.58.210: [b,q,?] (255.255.248.0)
Confirming the disaster recovery configuration
Veritas Cluster Server One 5.0.0 by Symantec
VCS One PM Disaster Recovery Configuration Verification:
Virtual IP 1:
IP Address : 10.200.58.209
Netmask : 255.255.248.0
NICs for Virtual IP 1:
redhat95243 : eth0
pilotvmred9 : eth0
Virtual IP 2:
IP Address : 10.200.58.210
Netmask : 255.255.248.0
NICs for Virtual IP 2:
redhat95243 : eth0
pilotvmred9 : eth0
Is this information correct? [y,n,q] (y)