Symantec Veritas Cluster Server One, Installation Manual

Page: 80 / 210

80 Installing the Simulator
About the Simulator
About the Simulator
You can use the Simulator to view, modify, and test the VCS One cluster
configuration and behavior in a safe simulation that does not affect your
production environment.
For more information about using the Simulator, see the Veritas Cluster Server
One User’s Guide .
Before you install the Simulator
You can install the VCS One Simulator software on one or more Windows
systems. A Simulator is available for Windows only.
Before you install the Simulator, do the following:
■ Ensure that the Windows version of the system where you will install the
Simulator is at a level supported by this release. For supported operating
system levels, see the
Veritas Cluster Server One Release Notes .
■
Choose any installation software disc. The Windows Simulator is available
under the
simulator
directory on each VCS One installation software disc.
Installing the Simulator
The Simulator included in this release of VCS One can co-exist with earlier
versions. Earlier versions of the Simulator use the same ports as the Simulator
included in this release. If you have an earlier version of the Simulator, make
sure that it is not running before you install the version included in this VCS
One release.
To install the Simulator
1 Insert the VCS One software disc for any supported platform into the disc
drive.
2 Navigate to the
simulator
directory. From there, open the
windows
directory.
3 Double click on vcsonesim.exe to start the VCS One Simulator installation
wizard.
4 Click Next on the Welcome screen.
5 Accept the End-User Software License Agreement and click Next .
6 Check the destination folder where the VCS One Simulator will be installed.