Symantec Veritas Cluster Server One, Installation Manual, Page: 48 / 210

48 Installing and configuring the VCS One Policy Master
Configuring the Policy Master
Choosing a storage architecture to configure
Symantec recommends that you use a shared storage architecture for storing
the configuration database. You can configure Storage Foundation if you are in
the process of installing Storage Foundation, or it is already on your system.
Otherwise, you can configure NetApp filer or another storage architecture.
To select and configure a storage architecture
1 At the Storage Architecture prompt, select the storage architecture you want
to configure.
2 See Table 2-1 for details on the remaining configuration tasks.
Configuring disaster recovery
Follow the steps in this section to specify if you want to configure disaster
recovery.
For information about disaster recovery, see “ Preparing to configure disaster
recovery ” on page 39.
Deciding when to configure disaster recovery
You can configure disaster recovery during the VCS One installation and
configuration process, or you can configure it after installing and configuring
VCS One.
Table 2-1 VCS One configuration task details
To configure Complete these tasks
Storage Foundation as part of the
installation and configuration
process
1 “ Configuring disaster recovery ” on page 48
2 “ Configuring Storage Foundation ” on page 51
3 “ Starting the Policy Master ” on page 54
Storage Foundation when it is
already installed on your system
1 “ Configuring Storage Foundation ” on page 51
2 “ Configuring disaster recovery ” on page 48
3 “ Starting the Policy Master ” on page 54
NetApp filer, or another storage
architecture
1 “ Configuring your storage architecture ” on
page 51
2 “ Configuring disaster recovery ” on page 48
3 “ Starting the Policy Master ” on page 54