manualshive.com logo in svg

Symantec Veritas Cluster Server One, Installation Manual, Page: 137 / 210

Share
Download
Symantec Veritas Cluster Server One Installation Manual Download Page 137

137

Sample Policy Master upgrade scenarios

Upgrade scenario details

Upgrade scenario details

This section provides instructions for each of the upgrade scenarios. 

For information about the different scenarios, see: “

Upgrade scenario overview

” 

on page 136.

Performing a simplified upgrade and importing two new systems

Use this upgrade scenario for a test environment or production environment. If 
the VCS One 5.0 Policy Master upgrade fails, you can roll your configuration 
back to VCS One 2.0.1. 

This scenario has no verification phase, and requires you to import two new 
systems. This upgrade scenario has the shortest down time, and the fewest 
steps. 

Installing the VCS One 5.0 Policy Master on two new systems

Follow the instructions in this section to install the Policy Master on two new 
systems in the Policy Master cluster. When the installation is complete, the new 
VCS One 5.0 systems (Node3 and Node4) replace the previous 2.0.1 systems 
(Node1 and Node2). 

To install the VCS One 5.0 Policy Master on two new systems

1

Check that Node3 and Node4 are running an operating system that VCS One 
5.0 supports. Do one of the following:

Figure B-1

Performing a simplified upgrade and importing two new systems

Summary of Contents for Veritas Cluster Server One



















































































































































































































Reviews:

No comments