Symantec Veritas Cluster Server One, Installation Manual

Page: 130 / 210

130 Uninstalling VCS One software
Uninstalling the VCS One software
Uninstalling the VCS One client software
The uninstallation script uninstalls the VCS One client, which communicates
securely with the Policy Master, and starts and stops the agents on the local
system.
To uninstall the software from remote systems at this time, make sure ssh or rsh
is configured between the system where you plan to run the uninstall program
and the other systems where you are uninstalling the software.
When
uninstallvcsonecd
removes software on a system where VCS is
installed, any file system soft links in the directory
/opt/VRTS/bin
are
removed on the system. Running VCS and VCS One on the same system is not a
supported configuration. To work around this issue, uninstall VCS and reinstall
VCS One. For testing purposes only, if you need both products installed, replace
the removed soft links.
See “ Setting up the Policy Master cluster hardware ” on page 20.
Launching the installer
Launching the installer
1 On the system where the VCS One client is installed, go to the directory
containing the uninstallvcsonecd program. Enter the following:
cd /opt/VRTS/install
If you plan to use the uninstallation program on the software disc, mount
the appropriate disc by platform. Enter the following:
cd platform
where
platform
is the platform-specific directory, such as
sles10_x86_64
or
sol_sparc
.
Go to the directory
cluster_server_one
.
2 Start the client uninstallation script. Enter the following:
./uninstallvcsonecd
Specifying the system to uninstall
To specify the system to uninstall
1 At the system name prompt, enter the name of each system where you want
to uninstall the VCS One client daemon software. If you have more that one
system, separate the names by a space. (Fully-qualified domain names and
IP addresses are acceptable.)
2 At the uninstallation confirmation prompt, enter the following:
y
.