Symantec Veritas Cluster Server One, Installation Manual

Page: 170 / 210

170 Sample installation output
Installing the VCS One Policy Master with Storage Foundation
3. Other -- Local storage or shared storage exported by an NFS
server and accessible by all the systems
Symantec recommends to use different shared storages for different
VCS One Policy Master server farms.
Note: Storage Foundation is not installed on all the Policy Master
nodes. If you install and configure Storage Foundation for storing
the VCS One PM Configuration Database, you must defer Storage
Foundation configuration until all packages are successfully
installed.
Storage architecture:
1) Storage Foundation
2) NetApp filer
3) Other
Please select a kind of Storage Architecture for the Configuration
Database with the index number: [1-3,q] 1
Deciding whether to configure disaster recovery
Veritas Cluster Server One 5.0.0 by Symantec
A VCS One global cluster links the individual VCS One clusters at
separate sites, and enables wide-area failover and disaster
recovery (DR) for the applications you configured. A VCS One global
cluster configuration can have a maximum of two clusters.
Clustering on a global level also requires an infrastructure to
replicate the application data between these clusters.
The following information is required to configure VCS One PM
disaster recovery:
One or more virtual IP addresses and netmasks
Public NICs used by each system for the virtual IP addresses
Do you want to configure VCS One PM disaster recovery? [y,n,q] (y)
Configuring disaster recovery
Active NIC devices discovered on redhat95243:
NIC : IP Address : Netmask
----------------------------------------
eth0 : 10.198.95.243 : 255.255.248.0
Active NIC devices discovered on pilotvmred9:
NIC : IP Address : Netmask
----------------------------------------