Symantec Veritas Cluster Server One, Installation Manual

Page: 70 / 210

70 Installing and configuring the VCS One client
Installing the VCS One client
Launching the installer
To launch the client installer
1 On the software disc, change directories to the platform-specific directory.
Enter the following:
#
cd platform
where
platform
is the platform-specific directory, such as
sles10_x86_64
or
sol_sparc
.
Go to the directory
cluster_server_one
.
2 Start the installer script. Enter the following:
#
./installer
3 From the Task menu, select the following task:
Install/Upgrade a Product
4 From the list of products, select:
Veritas Cluster Server One by Symantec - Client Daemon
(VCS One Client)
Note: When the installer installs software on a system where VCS is
installed, any file system soft links in the directory
/opt/VRTS/bin
are overridden on the system. Running VCS and VCS One on the same
system is not a supported configuration.
5 Accept the End User License Agreement (EULA). At the EULA prompt, enter
the following:
y
.
The installer provides information about the installation and configuration.
6 Review the information on each page and press Enter to continue.
Specifying the target systems
You must specify the name of the target systems for each client system.
To specify the target systems
◆
At the system names prompt, enter the names of the systems on which you
want to install the VCS One client. Separate each name with a space. (Do not
enter fully-qualified domain names or IP addresses.) For example, enter the
following:
redhat95241 redhat95244
Reviewing the package list
The installer provides a list of packages to be installed.