Symantec Veritas Cluster Server One, Installation Manual

Page: 72 / 210

72 Installing and configuring the VCS One client
Configuring the VCS One client
Entering the virtual IP addresses for the client
You must enter the Policy Master virtual IP addresses that the client uses. You
must also enter the base IP addresses for the subnets on which the Policy Master
and client communicate.
1 Enter the Policy Master virtual IP addresses separated by a space. For
example, enter the following:
#
192.168.5.150 192.168.5.151
2 At the Local IP address prompt for each client system, enter the local IP
address of the client system NIC that will communicate with the Policy
Master virtual IP address.
3 At the valid list of space-separated IP addresses prompt, for each client
system, enter the base IP addresses for that system.
4 At the permanent credential package prompt, do one of the following:
■ If you have a permanent credential package, enter the following:
y
.
■ If you have a deployment credential, enter the following:
n
.
5 At the deployment credential package prompt, do one of the following:
■ If you have a permanent credential package, enter the following:
n
.
■ If you have a deployment credential, enter the following:
y
.
Deciding whether to configure the SSL library path
You can optionally configure the SSL library path.
To specify whether to configure the SSL library path
◆
At the SSL library path prompt, do one of the following:
■ If you do not want to configure the SSL library path, enter the
following:
n
.
■ If you want to configure the SSL library path, enter the following:
y
.
Then enter the SSL library path. The path must be to a directory that
contains the libcrypto.so and libssl.so library files. For example, enter
the following:
/usr/local/lib
.
The installer checks that ssh communications exist from the installation system
to the root broker system, and that the clock time difference between the Policy
Master and client is less than 30 seconds.