Symantec Veritas Cluster Server One, Installation Manual

Page: 125 / 210

125 Upgrading from VCS One 2.0.1 to 5.0
Upgrading the client
4 Follow the instructions for uninstalling the client software, with one
exception: At the service group evacuation prompt, enter
n
to leave the
service groups in their current state.
See Chapter 11, “Uninstalling VCS One software” for uninstallation
instructions.
Installing and configuring the 5.0 client
After you uninstall the 2.0.1 client, follow the instructions in this section to
install and configure that system as a VCS One 5.0 client system.
To install and configure the 5.0 client
1 Log in as root on the client system.
2 Start the installation script. Enter the following:
# ./rhel5_x86_64/installer my_machine3
3 From the Task menu, select the following task:
Install/Upgrade a Product
4 From the list of products, select:
Veritas Cluster Server One by Symantec - Client Daemon
(VCS One Client)
5 Follow the instructions for installing the client software.
See Chapter 4, “Installing and configuring the VCS One client” for
installation instructions.
Upgrading the 2.0.1 client to 5.0 on additional systems
After you have upgraded one of your client systems, follow the instructions in
this section to upgrade additional systems.
To upgrade the 2.0.1 client to 5.0 on additional systems
1 Follow the instructions to uninstall a 2.0.1 system.
See Appendix 10, “” on page 124 .
2 Follow the instructions to install and configure the 5.0 client.
See “ Installing and configuring the 5.0 client ” on page 125.
3 Make sure the client system is in the RUNNING state. Enter the following:
#
/opt/VRTSvcsone/bin/hasys -state
4 Check that the service groups are up and running on the client system.
Enter the following:
#
/opt/VRTSvcsone/bin/hagrp -state