Symantec Veritas Cluster Server One, Installation Manual

Page: 49 / 210

49 Installing and configuring the VCS One Policy Master
Configuring the Policy Master
Specify when to configure disaster recovery
◆
At the VCS One disaster recovery configuration prompt, do one of the
following:
Configuring disaster recovery as part of the installation and
configuration process
Follow these steps to configure disaster recovery during the installation and
configuration process. To configure disaster recovery later, see:
“ Configuring disaster recovery after you install VCS One ” on page 50.
To configure disaster recovery
1 Enter one or more virtual IP addresses, separated by a space. For example,
enter the following:
192.168.1.15 192.168.1.16
.
Symantec recommends dedicating two or more unique virtual IP addresses
to disaster recovery. If you dedicate fewer than two unique virtual IP
addresses to disaster recovery, you are prompted to specify if you want to
continue.
2 Do one of the following:
■ If you are prompted about continuing with fewer than two unique
virtual IP addresses, go to
step 3 .
■
If you are not prompted about continuing with fewer than two unique
virtual IP addresses, go to
step 5 .
3 Do one of the following:
■ To add more virtual IP addresses, enter the following:
n
. Go back to
step 1 .
■ To continue with fewer than two unique virtual IP addresses, enter the
following:
y
. Go to step 4 .
If you want to configure
disaster recovery as part of
the VCS One installation and
configuration process
Enter the following:
y
.
Go to the next section, “ Configuring disaster recovery
as part of the installation and configuration process .”
If you do not want to
configure disaster recovery,
or if you want to configure
disaster recovery after you
install and configure VCS
One
Enter the following:
n
.
To configure disaster recovery after you install the
Policy Master, see the section:
“Configuring disaster recovery after you install VCS
One” on page 50.