Symantec Veritas Cluster Server One, Installation Manual, Page: 55 / 210

55 Installing and configuring the VCS One Policy Master
After you install the Policy Master
After you install the Policy Master
After you install the Policy Master, see the following sections for information
about the next installation steps:
■ “ Verifying the Policy Master installation ,” in the next section
■
“ Setting the default platform in the VCS One cluster ” on page 57
■
“ About configuring VCS One ” on page 57
Verifying the Policy Master installation
Once you install the Policy Master, is a good idea to verify the Policy Master
installation. Verifying the installation checks if all of the Policy Master systems,
service groups, and resources are up and running.
To verify the Policy Master installation
1 Check the state of the Policy Master service group on each system. Enter the
following:
#
/opt/VRTSvcsone/bin/haadmin -state
The output should show the PMSG is
ONLINE
on one system,
OFFLINE
on the
other.
2 Verify that the PMSG is online on one system and offline on the other. Enter
the following:
#
/opt/VRTSvcsone/bin/haadmin -status -summary
3 Display the status of each of the PMSG resources on each system. Enter the
following:
#
/opt/VRTSvcsone/bin/haadmin -status
The status of each resource in the Policy Master service group displays.
For a new installation, the output of the
haadmin
-
status
command shows the
following:
■
All systems are running.
■
NIC resources are
ONLINE
on all systems.
■ All other resources are
ONLINE
on one system and
OFFLINE
on the other.
Table 2-3 describes the resources in the
haadmin -status
output when the
Policy Master uses Storage Foundation for storing configuration information.