Symantec Veritas Cluster Server One, Installation Manual, Page: 109 / 210

109 Adding a new or replacement system to the Policy Master cluster
Adding a system to the Policy Master cluster
Adding a system to the Policy Master cluster
Before you add the VCS One software to the new system, physically add the
system to the Policy Master cluster.
Setting up the hardware
Connect the new system to the Policy Master cluster and shared storage.
To set up the hardware
1 Connect the VCS One private Ethernet controllers. Do one of the following:
■
If you are expanding from a Policy Master cluster with two systems, use
independent hubs for private network connections, replacing crossover
cables if used.
■ If you already use independent hubs, connect the two Ethernet
controllers on the new system to the independent hubs.
Figure 9-1 illustrates a new system being added to a three-system Policy
Master cluster using two independent hubs.
Figure 9-1 Adding a system to a three-node Policy Master cluster using two
independent hubs
2 Connect the system to the shared device storing the Policy Master
configuration database.
3 Configure the new system to use the Policy Master systems’ ssh key.
See “ Setting up the Policy Master cluster hardware ” on page 20.
Private
Network
Public Network
Hubs