Symantec Veritas Cluster Server One, Installation Manual

Page: 65 / 210

65 Installing and configuring the VCS One client
Preparing to install the VCS One client
■
Enable the required ports for Linux.
See “ Opening the required ports ” on page 21.
■ Install the required operating system patches. See the Veritas Cluster Server
One Release Notes for the required operating systems patches.
Solaris-specific preparations
Before you install the VCS One client on a Solaris server system:
■ Install the required operating system patches. See the Veritas Cluster Server
One Release Notes for the required operating systems patches.
If you will install the VCS One client on a Solaris system with zones configured:
■
Ensure that the zones have been completely installed, including an initial
boot of the zone, before installing the VCS One client.
If you install the VCS One client on Solaris 10 systems running non-global
zones:
■
Ensure that /opt is not inherited by any non-global zone, using the following
procedure:
To ensure that /opt is not inherited by any non-global zone command
1 Check whether /opt is inherited by a non-global zone command. Enter the
following:
zonecfg -z zone_name info
Output similar to the following appears:
zonepath: /export/home/zone1
autoboot: false
pool: yourpool
inherit-pkg-dir:
dir: /lib
inherit-pkg-dir:
dir: /platform
inherit-pkg-dir:
dir: /sbin
inherit-pkg-dir:
dir: /usr
2 Look for any occurrences of the /opt directory being inherited. If it is
inherited, you see the following:
inherit-pkg-dir:
dir: /opt
3 If you see that the /opt directory is inherited, you must reinstall the zone.