Symantec Veritas Cluster Server One, Installation Manual

Page: 184 / 210

184 Sample installation output
Installing the VCS One Policy Master with NetApp
Confirming the NetApp configuration
Veritas Cluster Server One 5.0.0 by Symantec
NetApp filer configuration:
Mount Point: /software/vcsone
NetApp filer: netapp3.veritas.com
Access Mode: UseAPI
Username: root
Password not shown for security reasons
Hostname / IP Address for NIC connected to NetApp filer:
thoropt158: thoropt158
thoropt159: thoropt159
Path on NetApp filer: /vol/rgriffit_vol/vcsone
SSL Path: /lib
Is this information correct and not in use by other VCS One Policy
Master server farms? [y,n,q] (y)
Veritas Cluster Server One 5.0.0 by Symantec
Cleanup of directories on shared storage
The shared storage might contain directories from a previous
installation.
WARNING: If you do not clean up these directories, VCS One may be
improperly configured and fail to start up. The installer will quit
if the shared storage directories are not clean.
Do you wish to perform cleanup? [y,n,q] (y)
Veritas Cluster Server One 5.0.0 by Symantec
Deciding whether to configure disaster recovery
VCS One PM Disaster Recovery Configuration
A VCS One global cluster links the individual VCS One clusters at
separate sites, and enables wide-area failover and disaster recovery
(DR) for the applications you configured. A VCS One global cluster
configuration can have a maximum of two clusters.
Clustering on a global level also requires an infrastructure to
replicate the application data between these clusters.
The following information is required to configure VCS One PM
disaster recovery:
One or more virtual IP addresses and netmasks
Public NICs used by each system for the virtual IP addresses
Do you want to configure VCS One PM disaster recovery? [y,n,q] (y) n