Symantec Veritas Cluster Server One, Installation Manual, Page: 129 / 210

129 Uninstalling VCS One software
Uninstalling the VCS One software
2 Start the Policy Master uninstallation script. Enter the following:
./uninstallvcsonepm
3 At the system name prompt, enter the name of each system where you want
to uninstall the VCS One Policy Master. Separate the names with a space.
(Fully-qualified domain names and IP addresses are acceptable.) For
example, enter the following:
sys1 sys2
You are prompted to uninstall storage if you installed Storage Foundation
when you installed the VCS One Policy Master.
4 At the Storage Foundation uninstallation prompt, do one of the following:
■ If installed Storage Foundation when you installed the Policy Master,
and you want to uninstall Storage Foundation, enter
y
.
■
If did not install Storage Foundation when you installed the Policy
Master, or if you do not want to uninstall Storage Foundation, enter
n
.
5 At the uninstallation confirmation prompt, confirm that you are sure about
uninstalling the VCS One Policy Master. Enter the following:
y
. (Entering
n
aborts the uninstallation.)
The program stops the Policy Master.
If you are installing on Solaris, you must close any open volumes on your
system. Open volumes are volumes that are mounted and used by another
application. If you try to uninstall the VCS One Policy Master while there are
open volumes on the system, the uninstallation may fail.
6 If you are installing on Solaris, close any open volumes and confirm that
there are no open volumes on your system. At the open volumes prompt,
enter
n
.
7 At the residual VCS One program removal prompt, decide if you want to
delete the
/opt/VRTSvcsone
,
/etc/VRTSvcsone
, and
/var/VRTSvcsone
directories. Do one of the following:
■ To remove the directories, enter
y
.
■ To keep the directories, enter
n
.
Note: If the VCS One Policy Master is installed on the node where you are
running the uninstall program, be careful not to remove residual program
directories that the Policy Master is using.
The program uninstalls the software and indicates where the uninstallation
logs are placed.