Symantec Veritas Cluster Server One, Installation Manual

Page: 181 / 210

181 Sample installation output
Installing the VCS One Policy Master with NetApp
Would you like to configure a second private heartbeat link?
[y,n,q,b,?] (y)
Enter the NIC for the second heartbeat link on thoropt158: [b] eth1
Do you want to configure an additional low priority heartbeat link?
[y,n,q,b,?] (n)
Are you using the same NICs for private heartbeat links on all
systems? [y,n,q,b,?] (y)
Would you like to use the default port number 14159 for
Authentication Services? [y,n,q,b] (y)
Confirming the VCS One Policy Master cluster configuration
Veritas Cluster Server One 5.0.0 by Symantec
Policy Master cluster configuration information verification:
Cluster Name : vcsonepm_cluster
Cluster ID : 65530
Broker Port : 14159
Private Heartbeat NICs for thoropt158:link1=eth0 link2=eth1
Private Heartbeat NICs for thoropt159:link1=eth0 link2=eth1
Is this information correct? [y,n,q] (y)
Configuring the Policy Master virtual IP addresses
Veritas Cluster Server One 5.0.0 by Symantec
The following information is required to configure the Policy
Master:
Public NICs used by each system in the Policy Master cluster
Policy Master virtual IP addresses and netmasks
Active NIC devices discovered on thoropt158:
NIC : IP Address : Netmask
---------------------------------------
eth2 : 10.182.7.218 : 255.255.240.0
Active NIC devices discovered on thoropt159:
NIC : IP Address : Netmask
---------------------------------------
eth2 : 10.182.7.219 : 255.255.240.0
Enter the NIC for Policy Master Virtual IP address to use on
thoropt158: [b,q,?] (eth2)
Would you like to use the same NIC (eth2) on all PM nodes? [y,n,q,b]
(y)