Symantec Veritas Cluster Server One, Installation Manual

Page: 132 / 210

132 Uninstalling VCS One software
Uninstalling the Simulator
Uninstalling the Simulator
The following section describes how to uninstall the Simulator.
To uninstall the Simulator
1 Make sure that all Simulator instances are stopped. If a Simulator instance
is running, stop it using the following command at the Windows command
prompt:
installation_location \VCSOne\hamultisim -stopsim instance_name
where
installation_location
is the directory location where you
installed the Simulator and
instance_name
is the name of the running
Simulator instance. If multiple Simulator instances are running, enter this
command for each Simulator instance.
You can stop the Simulator by running a script or entering a command.
To stop the default Simulator instance, do one of the following:
■
At the Windows command prompt, run the following batch file script:
installation_location \VCSOne\stopsim.bat
■
At the Windows command prompt, enter the following command:
installation_location \VCSOne\hamultisim -stopsim default
2 If you used the
-hosts
option with
hamultisim -addsim
when you
created the Simulator instance, do one of the following:
■ At the Windows command prompt, run the following command to
remove the Simulator instance and delete its entry from the hosts file:
installation_location \VCSOne\hamultisim -removesim \
instance_name
■ Manually edit the hosts file to remove the unwanted entries. The hosts
file is located here:
C:\WINDOWS\system32\drivers\etc\hosts
3 Go to the directory where you installed the Simulator.
4 Select the
VCSOne
subdirectory.
5 Delete the
VCSOne
subdirectory and its contents.
Deleting the
VCSOne
subdirectory removes the Simulator from the system.