Symantec Veritas Cluster Server One, Installation Manual

Page: 44 / 210

44 Installing and configuring the VCS One Policy Master
Configuring the Policy Master
Configuring the Policy Master
During the configuration process, you configure your Policy Master cluster. The
installer also gives you the option to configure disaster recovery, and Storage
Foundation or NetApp.
The configuration procedures are in the following subsections:
■ “ Starting the Policy Master configuration ” on page 44
■ “ Configuring the Policy Master cluster ” on page 44
■ “ Specifying the authentication services port number ” on page 46
■
“ Configuring virtual IP addresses for the Policy Master ” on page 46
■
“ Choosing a storage architecture to configure ” on page 48
■
“ Configuring disaster recovery ” on page 48
■ “ Configuring your storage architecture ” on page 51
■ “ Starting the Policy Master ” on page 54
Starting the Policy Master configuration
If you have not yet started the Policy Master configuration, do so now.
To start the Policy Master configuration
1 Start the VCS One configuration. Enter the following:
# ./installvcsonepm -configure
2 Enter the names of the systems on which you want to configure the VCS One
Policy Master. Separate each name with a space. Do not enter fully-qualified
domain names or IP addresses. For example, enter the following:
sys1
sys2
Configuring the Policy Master cluster
You must provide a host name for the Policy Master cluster. If you install the
Policy Master on two or more systems, you must also provide a numerical ID
number and configure heartbeat settings.
To install Policy Master now,
but configure it later
Enter the following:
n
.
The installer installs the packages, and you can
configure the Policy Master later. When you are ready
to configure, see the next section:
“ Configuring the Policy Master .”