Symantec Veritas Cluster Server One, Installation Manual

Page: 71 / 210

71 Installing and configuring the VCS One client
Configuring the VCS One client
To review the package list
◆
Read the list of packages to be installed and press Enter to continue.
For a list of the packages, see Appendix F, “Required packages” on
page 203 .
Specifying when to configure the client
You must specify whether to configure the client right after the installation, or
complete the installation and configure the client later.
To specify when to configure the client
◆
At the client configuration readiness prompt, do one of the following:
Configuring the VCS One client
The client configuration procedures are in the following subsections:
■ “ Starting the client configuration ” on page 71
■ “ Entering the virtual IP addresses for the client ” on page 72
■
“ Deciding whether to configure the SSL library path ” on page 72
■
“ Synchronizing the clock times on your systems ” on page 73
Starting the client configuration
If you have not yet started the client configuration, do so now.
To start the client configuration
◆
Start the VCS One client configuration. Enter the following:
#
/opt/VRTS/install/installvcsonecd -configure
system_name
To configure the client as
part of the installation
process
Enter the following:
y
.
Go to the next section, “ Configuring the VCS One
client ” on page 71.
To install the client now, but
configure it later
Enter the following:
n
.
The installer installs the packages, and you can
configure the client later. When you are ready to
configure the client, see the next section,
“ Configuring the VCS One client ” on page 71.