Drive Chain / Drive Train / Drive Shaft: 3A-21
• Apply 5 – 7 cm
3
Lithium Base Molybdenum grease
(NLGI#2) to the propeller shaft splines and final drive
bevel gear coupling.
• Install the spring (15) and propeller shaft (16).
: Moly paste 99000–25140 (SUZUKI MOLY
PASTE or equivalent)
• Install the snap ring (17).
• After installing the propeller shaft with a new snap
ring, make sure that the propeller shaft turns smoothly
without any hitch or bearing noise.
Special tool
: 09900–06108 (Snap ring pliers)
• Apply grease to the lip of the dust seal.
CAUTION
!
Use a new dust seal to prevent oil leakage.
: Grease 99000–25010 (SUZUKI SUPER
GREASE A or equivalent)
• Install the dust seal with the special tools.
Special tool
(J): 09940–51410 (Bearing installer)
(K): 09925–18011 (Steering bearing installer)
Final Gear Parts Inspection
B822H13106017
Drive / Driven Bevel Gear
Inspect the drive and/or driven bevel gear wear or
damage. If any defects are found, replace the drive and/
or driven bevel gear with a new one.
Bearing
Inspect bearings, left and right for abnormal noise and
smooth rotation. Replace the bearing, if there is anything
unusual. Refer to “Final Gear Disassembly and
Assembly (Page 3A-14)”.
15
16
I822H1310081-02
17
I822H1310082-03
I822H1310083-02
(J)
(K)
I822H1310084-02
I822H1310085-01
I822H1310086-01
Summary of Contents for VLR1800
