Suzuki VLR1800, Service Manual

Page: 550 / 624

5B-18 Manual Transmission:
• Install the dowel pins (11) and gasket (12).
CAUTION
!
Replace the gasket (12) with a new one.
• Apply grease to the lip of the oil seal and install the
gearshift cover (13).
NOTE
Fit the clamp to the bolt (14).
: Grease 99000–25010 (SUZUKI SUPER
GREASE A or equivalent)
• After installing the gearshift lever, check the gearshift
lever height. Refer to “Gearshift Lever Height
Inspection and Adjustment (Page 5B-14)”.
Gearshift Linkage Inspection
B822H15206015
Refer to “Gearshift Shaft / Gearshift Cam Plate Removal
and Installation (Page 5B-15)”.
Gearshift Shaft
Check the gearshift shaft for bend or wear.
Check the return spring for damage or fatigue.
If any defects are found, replace the defective part(-s).
Gearshift Shaft Oil Seal
Inspect the gearshift shaft oil seal lip for wear or
damage. If any defect is found, replace the oil seal with a
new one.
Gearshift Shaft Bearing
Inspect the gearshift shaft bearing for abnormal noise
and smooth rotation. Replace the bearing if there is
anything unusual.
“F”
“F”
10
I822H1520062-02
12
11
11
I822H1520063-02
13
14
I822H1520064-02
I822H1520066-01
I822H1520067-01
I822H1520068-01