Suzuki VLR1800, Service Manual

Page: 449 / 624

Wheels and Tires: 2D-15
3) Install a new dust seal with the special tool.
Special tool
(C): 09913–70210 (Bearing installer set)
4) Apply grease to the dust seal lip.
: Grease 99000–25010 (SUZUKI SUPER
GREASE A or equivalent)
5) Install the rear wheel assembly. Refer to “Rear
Wheel Assembly Removal and Installation
(Page 2D-11)”.
Tire Removal and Installation
B822H12406011
Removal
The most critical factor of a tubeless tire is the seal
between the wheel rim and the tire bead. For this
reason, it is recommended to use a tire changer that can
satisfy this sealing requirement and can make the
operation efficient as well as functional.
CAUTION
!
For operating procedures, refer to the
instructions supplied by the tire changer
manufacturer.
NOTE
When removing the tire in case of repair or
inspection, mark the tire with a chalk to
indicate the tire position relative to the valve
position. Even though the tire is refitted to
the original position after repairing puncture,
the tire may have to be balanced again since
such a repair can cause imbalance.
1. Spacer “a”: Clearance
“ a ”
RH LH
LH
RH
(A)
(A)
(B)
(B)
1
I822H1240035-02
(C)
I822H1240028-01
I822H1240029-01
I649G1240037-02