Suzuki VLR1800, Service Manual

Page: 557 / 624

Clutch: 5C-4
Clutch Removal
B822H15306016
1) Drain engine oil. Refer to “Engine Oil and Filter
Replacement in Section 0B (Page 0B-11)”.
2) Remove the exhaust pipes and mufflers. Refer to
“Exhaust Pipe / Muffler Removal and Installation in
Section 1K (Page 1K-9)”.
3) Remove the clutch cover (1).
4) Remove the gasket (2) and dowel pins.
5) Remove the clutch spring set bolts, clutch springs
and pressure plate (3).
NOTE
Loosen the clutch spring set bolts little by
little and diagonally.
6) Remove the clutch push piece (4), thrust washer (5)
and bearing (6).
7) Remove the clutch push rod (7) and clutch push rod
release ball (8).
NOTE
If it is difficult to pull out the push rod (7), use
a magnetic hand or wire.
8) Remove the clutch drive plates (9) and driven plates
(10).
1
I822H1530003-01
2
I822H1530004-02
3
I822H1530005-01
5
6
4
I822H1530006-01
7
8
I822H1530007-01
9
10
I822H1530008-01