Sun Microsystems Netra CT 410, Service Manual

Page: 11 / 296

xi
Figures
FIGURE 1-1
Attaching the Antistatic Wrist Strap 1–3
FIGURE 2-1
Locating the Power Supply Locking Mechanism on the Netra CT 810 Server 2–3
FIGURE 2-2
System Status Panel Locations 2–4
FIGURE 2-3
System Power Button and System Power LED Locations (Netra CT 810 Server) 2–5
FIGURE 2-4
System Power Button and System Power LED Locations (Netra CT 410 Server) 2–5
FIGURE 4-1
System Status Panel Locations 4–2
FIGURE 4-2
System Status Panel (Netra CT 810 Server) 4–3
FIGURE 4-3
System Status Panel (Netra CT 410 Server) 4–3
FIGURE 4-4
Power and Okay to Remove LEDs 4–3
FIGURE 4-5
Power and Fault LEDs 4–4
FIGURE 4-6
Connectors on the Netra CP2140 Host Rear Transition Module 4–21
FIGURE 4-7
Connectors on the Netra CP2500 Rear Transition Module Host (RTM-H) Board 4–22
FIGURE 6-1
Boards Within a Netra CT 810 Server 6–3
FIGURE 6-2
Boards Within a Netra CT 410 Server 6–4
FIGURE 6-3
Location of SW0501 on SMC Module 6–7
FIGURE 6-4
Switch SW0501 in Closed Position (Default) for the Netra CT Server 6–7
FIGURE 6-5
Reconfiguring a Netra CP2500 cPSB Board for Use as a cPCI Board 6–8
FIGURE 6-6
Loosening the Ejection Lever Captive Screws 6–12
FIGURE 6-7
Unlocking the Ejection Levers 6–13
FIGURE 6-8
LEDs on the System Status Panel (Netra CT 810 Server) 6–13