Sun Microsystems Netra CT 410, Service Manual

Page: 100 / 296

6-2 Netra CT Server Service Manual • February 2007
6.1 Boards
This section contains procedures for the installation, removal, and replacement of
the following hot-swappable boards for the Netra CT 410 server and Netra CT 810
server:
■
Host board
1
■
Satellite board
■
Alarm card
2
■
I/O board
FIGURE 6-1
shows the locations of these boards in the Netra CT 810 server.
FIGURE 6-2
shows the locations of these boards in the Netra CT 410 server.
1. The host board is hot-swappable only if the alarm card and system controller board are also installed in the
Netra CT server.
2. The alarm card is hot-swappable only if the host board and system controller board are also installed in the
Netra CT server.