Sun Microsystems Netra CT 410, Service Manual

Page: 40 / 296

2-6 Netra CT Server Service Manual • February 2007
2.2 Verifying Full Power-Up
The Netra CT server may take several minutes to completely power up and finish
the configuration process, depending on the number of I/O boards installed in the
system. Do not remove or install any boards in the Netra CT server until you have
verified that the system is completely powered up.
To verify that the system is completely powered up and is fully configured, as
superuser, enter:
Output similar to the following is displayed:
■
If the entry in the
State
field is
configured
, then the system is completely
powered up and configured. You can safely remove and install boards at this
point.
■
If the entry in the
State
field is not
configured
(for example,
configuring
or
unconfigured
), then the system is still coming up. Do not remove or install any
boards in the Netra CT server in this state. You must wait until the state is
configured.
# prtpicl -c fru -v | more
chassis (fru, 3d00000008)
:ChassisType SUNW,NetraCT-810
:State configured
:_class fru
:name chassis
...