Sun Microsystems Netra CT 410, Service Manual

Page: 272 / 296

B-6 Netra CT Server Service Manual • February 2007
2. Set the following connection parameters:
■
No parity
■
9600 baud
■
1 stop bit
■
8-bit data
TABLE B-6
Connecting a PC Laptop to an Alarm Card or Alarm Rear Transition Module
Server
Type
COM 1 Port on Netra CT Server Adapter Cable Adapter
Serial Port
on PC
Laptop
Netra CT
810 server • Front-access model: RJ-45 on the alarm
card. See Section A.3, “Alarm Card,
6U Single-Wide” on page A-44 .
• Rear-access model: DB-9 male on the
alarm rear transition module. See
Section A.5, “Alarm Rear Transition
Module” on page A-52
.
• Front-access
model:
RJ-45-to-
DB-9 male
• Rear-access
model:
Not needed
DB-9 female-to-
DB-9 female
null modem Not
needed DB-9
male
Netra CT
410 server • Front-access model: RJ-45 on the alarm
card. See Section A.3, “Alarm Card,
6U Single-Wide” on page A-44 or
Section A.4, “Alarm Card, 3U Double-
Wide” on page A-48
.
• Rear-access model: DB-9 male on the
alarm rear transition module. See
Section A.5, “Alarm Rear Transition
Module” on page A-52
.
• Front-access
model:
RJ-45-to-
DB-9 male
• Rear-access
model:
Not needed
DB-9 female-to-
DB-9 female
null modem Not
needed DB-9
male