Sun Microsystems Netra CT 410, Service Manual

Page: 110 / 296

6-12 Netra CT Server Service Manual • February 2007
6. Disconnect the board with the
cfgadm (1M)
utility:
where ap_id is the attachment-point ID. For example, to deactivate the board in slot
4, as superuser, enter:
7. If you are hot-swapping an alarm card, reset the alarm card before removing it.
Refer to the Netra CT Server System Administration Manual for more information.
8. Attach the antistatic wrist strap.
See Section 1.2, “Attaching the Antistatic Wrist Strap” on page 1-2 .
9. Using a No. 2 Phillips screwdriver, loosen the two captive screws inside the
board’s ejection levers, one on top and one on the bottom (
FIGURE 6-6
).
FIGURE 6-6
Loosening the Ejection Lever Captive Screws
# cfgadm -c unconfigure
ap_id
# cfgadm -c disconnect
ap_id
# cfgadm -c unconfigure IO-4
#
cfgadm -c disconnect IO-4