Sun Microsystems Netra CT 410, Service Manual

Page: 143 / 296

Chapter 7 Removing and Replacing Hard Drives and Removeable Media 7-5
4. Deactivate the hard drive.
As superuser, enter:
where ap_id is the attachment-point ID for the hard drive that you want to remove.
For example, to deactivate the upper hard drive (HDD 0), as superuser, enter:
5. Determine the next action:
■
If you are removing the boot drive, go to Step 6 .
■
If you are removing a normal data drive, as superuser, enter:
where ap_id is the attachment-point ID for the boot drive that you want to remove.
For example, for the upper hard drive (HDD 0), as superuser, you would enter:
6. Verify that the hard drive is deactivated.
As superuser, enter:
Output similar to the following is displayed:
# cfgadm -c unconfigure
ap_id
# cfgadm -c unconfigure c0::dsk/c0t0d0
# cfgadm -x remove_device
ap_id
# cfgadm -x remove_device c0::dsk/c0t0d0
# cfgadm -a c0
Ap_Id Type Receptacle Occupant Condition
c0 scsi-bus connected configured unknown
c0::dsk/c0t0d0 unavailable connected unconfigured unknown
c0::dsk/c0t6d0 CD-ROM connected configured unknown