Sun Microsystems Netra CT 410, Service Manual

Page: 168 / 296

8-14 Netra CT Server Service Manual • February 2007
FIGURE 8-12
Locating the Power Supply Unit LEDs on the System Status Panel (Netra CT
810 Server)
4. Push the purple locking mechanism up into the unlocked ( ) position.
FIGURE 8-13
shows the location of the locking mechanism for a power supply unit in
a Netra CT 810 server. The two LEDs on the power supply unit should go off. In
addition, after several seconds, the amber Okay to Remove LED (
) on the system
status panel for the remaining power supply unit in the Netra CT 810 server should
go to OFF. This state tells you that the remaining power supply unit is no longer hot-
swappable as long as you have the first power supply unit disabled.
Power supply unit LEDs