Suez Sievers M500e, Operation And Maintenance Manual

Page: 120 / 325

P
RINTING AND
E
XPORTING FROM THE
A
NALYZER
S
CREENS
.............................
Sievers M500e TOC Analyzer Operation and Maintenance Manual
DLM 78510-02 EN Rev. B 120 SUEZ © 2022
Printing and Exporting from the Analyzer Screens
Many of the Analyzer screens include Print and Export buttons to work with
specifically-selected information, and some screens also include Print All and Export
All buttons.
The Analyzer supports a PDF printer, which must first be connected to the Analyzer
(either directly or over an Ethernet network) and enabled in the firmware (
Settings
s
screen >
Hardware
tab). For more information, refer to “Installing an Ethernet
Connection (Optional)” on page 89 , “Configuring an Ethernet Connection” on page 157 ,
and “Enabling a PDF Printer” on page 162 .
The Analyzer also supports data export to a USB memory device or to a network,
according to the settings defined in the firmware. Review these Analyzer settings, which
are located on the
Export Preferences
Panel (
Settings
s
screen >
Instrument Settings
tab). For more information, refer to “Configuring Export Preferences” on page 138 ).
To print from an Analyzer screen
1. Verify that the screen includes a
Print
(or
Print All
or
Print Settings
or
Print
Table
) button.
2. Ensure a PDF printer is connected to the Ethernet port (either directly or over
a network) and the PDF printer is enabled in the firmware. (For information,
see “Enabling a PDF Printer” on page 162 .)
3. Do one of the following:
•
If there is more than one item available to print (such as a table of records or
panel of Protocol methods), select the record to print and click
Print
.
•
If an option to print all records associated with the screen is available, click
the applicable button, such as
Print All
or
Print Settings
or
Print Table
.
The Analyzer prints to the connected and enabled PDF printer.
To export from an Analyzer screen
1. Verify that the screen includes an
Export
(or
Export All
or
Export Settings
or
Export Table
) button.
2. If needed, refer to the Export settings on the
Export Preferences
panel to
identify the export destination (USB memory device or network) and other
settings. For more information, refer to “Configuring Export Preferences” on
page 138 ).
3. If using a USB memory device for the export, insert it into the USB port.
4. Do one of the following:
•
If more than one item is available to export (such as a table of records or
panel of Protocol methods), select the record to export and click Export .