Studer Vista 1 Operating Instructions Manual Download Page 81

Page: 81 / 401

Vista 1 Digital Mixing System

Desk Operation 2-41

Document generated: 18.04.17

SW V5.3

2.2.5.14

Grand Master faders

Vista 1’s control bay also hosts two ‘grand master’ faders.

The user determines which two faders are the most important

ones for him and to which he wants to have constant access.

This may be very useful as an ‘emergency access’ to very

important output faders, since these faders will never scroll

or be switched over in any way. Which two channels are

controlled by these faders is defined with the Graphical Con-

troller, in the top right corner of the strip setup window under

the Control Bay tab, as shown above.

Note:

Any two

console faders can be assigned as ‘grand

master’ faders, regardless of their channel type.

Summary of Contents for Vista 1


















































































































































































































































































































































































































Search results

Summary of Contents for Vista 1

Reviews:

Related manuals for Vista 1

Brands by name

Popular brands

Studer Vista 1, Operating Instructions Manual

Search results

Summary of Contents for Vista 1

Reviews:

Related manuals for Vista 1

Brands by name

Popular brands