Studer Vista 1 Operating Instructions Manual Download Page 388

Page: 388 / 401

Vista 1 Digital Mixing System

1-12 Vista 1 FX

Document generated: 18.04.17

SW V5.3

Operate the FX parameters from the FX icon in the Vistonics touch area.

. Activate the channels

Insert On/Off.

Use the effects wet/dry

Mix

parameter to blend the processed signal to the

dry signal to get the desired resulting sound.

9.3.5

Loading effects

When touching into the FX icon area of the Vistonics, a number of blue

coloured Vistonics rotaries and icon areas are opened up. This area is always

4 x 4 Vistonics rotaries wide. It is divided into the following areas :

Category :

The Vista effect types are grouped into categories. Each category has its own

set of effect types.

Effect Type :

Effect types are defined Lexicon factory presets, which can only be loaded.

Effect types cannot be stored as user presets - as is normally possible with

standalone effect units.

When effect parameters are adapted to the users needs - they can be stored

within a snapshot. Effect types always remain as they originally have been

Load

button is changed and becomes a

Clear

button. By pressing

Clear

all parameters are cleared back to the original Effect type values.

Mix :

Adjusts the proportion of wet (processed) signal to dry (unprocessed) signal.

Ranges from 0% (all dry) to 100% (all wet). With send-return effects, you

will leave this at 100% wet, and with insert-effects, the desired dry/wet blend

can be created.

On/Off - Copy/Paste :

Here, the effect processing is switched

Off.

Please note, that the default state of the processing is

Off

The small Vistonics button has the function of a

copy/paste

button. With

the

copy/paste

button, effect settings can be copied from effect machine to

machine - or into the clibboard library.

Effect Parameters :

In this area, all effect parameters are displayed and can be controlled from

the Vistonics rotaries and buttons.

Summary of Contents for Vista 1


















































































































































































































































































































































































































Search results

Summary of Contents for Vista 1

Reviews:

Related manuals for Vista 1

Brands by name

Popular brands

Studer Vista 1, Operating Instructions Manual

Search results

Summary of Contents for Vista 1

Reviews:

Related manuals for Vista 1

Brands by name

Popular brands