Studer Vista 1 Operating Instructions Manual Download Page 201

Page: 201 / 401

Vista 1 Digital Mixing System

GC Operation 4-25

Document generated: 18.04.17

SW V5.3

4.4.2.6.1

Automatic Label Propagation

The philosophy on Vista consoles concerning labeling is not to name any

labels

within channels

, but to name

patch sources

in the General Patch, let-

ting the system propagate them to the connected channels. Specifically, we

are talking about two kinds of labels which will be propagated in this way:

Device labels (technical labels), and User labels (session labels, e.g. track

sheet). This also supports the workflow, whereby the operator first names his

sources and then patches them to any possible channel.

Advantages: If a source is connected to more than one channel, or if a patch

is changed, the labels are correctly updated on the actually patched channels.

You see what you hear!

User Labels

Device Labels

Fixed Labels

(Targets)

AES #1

Vocal

Track 1

e.g.

( Sources )

Change View by Clicking

on Label Type Button

in the GC's Toolbar

Channel

Vocal

Track 1

Displays e.g.:

General Patch

How to Proceed:

• Switch

the ‘Use Device Labels’ option in the Settings/Device Labels

menu. (Whilst being logged in as Sysadmin)

• Switch

the ‘Overwrite Chan. User label with Device Label’ option in

the Settings/Device Labels menu.

• There must be a file ‘

__DeviceLabels.pre

’ present, which holds your

device labels (technical labels), e.g. ‘Studio 1’, ‘Mic 1’).

•

Type your track sheet as User Labels of Input Ports into the Source List

of the General Patch.

• Patch Sources to Channels, and you will see session labels displayed in the

top line of each channel You may have to press the

GLOBAL VIEW: LABEL

TYPE

key until you see the device labels or the fixed channel labels in the

second line.

Summary of Contents for Vista 1


















































































































































































































































































































































































































Search results

Summary of Contents for Vista 1

Reviews:

Related manuals for Vista 1

Brands by name

Popular brands

Studer Vista 1, Operating Instructions Manual

Search results

Summary of Contents for Vista 1

Reviews:

Related manuals for Vista 1

Brands by name

Popular brands