Studer Vista 1 Operating Instructions Manual Download Page 304

Page: 304 / 401

Vista 1 Digital Mixing System

4-128 GC Operation

Document generated: 18.04.17

SW V5.3

The systems analog reference level is calibrated to the customers specification

when a system is ordered.

Important :

The

0dBFS Reference setting

influences only the readout of the

Mic Gain

dB value. No levels are changed by changing this setting !

4.6.2.1.2

Downmix Settings

This item allows defining the way in which surround channels are downmixed

to stereo outputs as well as their level contributions.

4.6.2.1.3

Sampling Rate

This item allows selecting the audio sampling rate from 44.1, 48 (default),

88.2 and 96 kHz.

Summary of Contents for Vista 1


















































































































































































































































































































































































































Search results

Summary of Contents for Vista 1

Reviews:

Related manuals for Vista 1

Brands by name

Popular brands

Studer Vista 1, Operating Instructions Manual

Search results

Summary of Contents for Vista 1

Reviews:

Related manuals for Vista 1

Brands by name

Popular brands