Studer Vista 1 Operating Instructions Manual Download Page 79

Page: 79 / 401

Vista 1 Digital Mixing System

Desk Operation 2-39

Document generated: 18.04.17

SW V5.3

2.2.5.12

Joystick

Display

Indicates the label of the channel currently assigned to the

Joystick.



Y axis lock



X axis lock

Lock the Y axis (



) or X axis (



) when moving the joystick.

Pressing



and



simultaneously deactivates the joystick

completely and clears the assignment to a channel.

FOLLOW

Activates the joystick to display the currently selected chan-

nel (select with

LINK/SEL

). If a gang is present, the joystick

will influence the whole gang.

FOLLOW

can be deactivated

by a second press; the joystick will then stay assigned to the

current channel.

DEFINE FOLW

When a gang is active and the joystick is set to

FOLLOW

mode, the joystick will physically move to the average of all

the pan values of the gang, allowing the user to make slight adjustments very

quickly. However, if the user wants to do a ‘full’ pan, so that all channels will

be e.g. fully left, he needs to define the channel for the joystick to display.

The joystick will then move to the pan position of the defined channel, but

will still keep influencing the whole gang.

Example:

One dialog microphone is moving together with the ambience

channels. The gang will include all channels even if the joystick is defined

to show the dialog microphone by using

DEFINE FOLW

Operation:

Create a gang, have

FOLLOW

on. Press

DEFINE FOLW

and select

one of the gang members (use the half-lit

LINK / SEL

keys as guides).

Summary of Contents for Vista 1


















































































































































































































































































































































































































Search results

Summary of Contents for Vista 1

Reviews:

Related manuals for Vista 1

Brands by name

Popular brands

Studer Vista 1, Operating Instructions Manual

Search results

Summary of Contents for Vista 1

Reviews:

Related manuals for Vista 1

Brands by name

Popular brands