Studer Vista 1 Operating Instructions Manual Download Page 271

Page: 271 / 401

Vista 1 Digital Mixing System

GC Operation 4-95

Document generated: 18.04.17

SW V5.3

4.5 Second level: The Application Menu

The application menu is opened by clicking on the round surveyor icon on

the left top corner of the GC screen. It contains most of the Vista system’s

bookkeeping functions. Management of projects, titles and mixes, access to

DSP configurations, backup and import functions, and also the Exit menu are

controlled from here.

4.5.1

Titles and Projects

The

Title

is the main container for all the session data. Titles contain all

snapshot, mix, cue list, title memo, and other files that relate to each session.

Titles also contain pointers that recall the appropriate configuration, monitor

file, and so on.

Titles are found in a project folder. Project folders may be created along with

a new title. For example, a project folder might be created at the start of an

album project when the title for the first song was made. Subsequent titles

could be created for each of the other songs and placed in that album’s project

folder. Projects are located in the

D950PROJECTS

folder.

Summary of Contents for Vista 1


















































































































































































































































































































































































































Search results

Summary of Contents for Vista 1

Reviews:

Related manuals for Vista 1

Brands by name

Popular brands

Studer Vista 1, Operating Instructions Manual

Search results

Summary of Contents for Vista 1

Reviews:

Related manuals for Vista 1

Brands by name

Popular brands