Studer Vista 1 Operating Instructions Manual Download Page 231

Page: 231 / 401

Vista 1 Digital Mixing System

GC Operation 4-55

Document generated: 18.04.17

SW V5.3

Edit

Opens an edit window that allows changes to be made to the name and the

timecode stamp of a selected cue from the cue list.

Delete

Opens an edit window that allows one or more cues to be deleted from the

list. Select a cue in the list by clicking on it, or select any number of cues from

the list using the familiar Windows multiple-selection techniques (drag on

the touch pad, or press

SHIFT

and select with the cursor). Click on the

Delete

button. This action will bring up a window asking you to confirm the delete

operation.

Info

Calls up cue info:

Click on the

Info

button; that will bring up a window displaying

• Cue list name;

• Cue list creation date and time;

• Cue list last modification date and time.



Tip

To enter timecode values, use the control surface keyboard’s numeric keypad.

The keypad features a double-zero key (00) to speed up the process. You do

not have to enter any punctuation marks – i.e., no colons or commas between

hour, minute, second, and frame values – since they will be added automati-

cally.

Click-and-Scroll Method

This is an alternate method for fast timecode entries. It is initiated by the

clicking-and-holding the left touch pad button followed by a touch pad move

in vertical direction.

Summary of Contents for Vista 1


















































































































































































































































































































































































































Search results

Summary of Contents for Vista 1

Reviews:

Related manuals for Vista 1

Brands by name

Popular brands

Studer Vista 1, Operating Instructions Manual

Search results

Summary of Contents for Vista 1

Reviews:

Related manuals for Vista 1

Brands by name

Popular brands