Studer Vista 1 Operating Instructions Manual Download Page 305

Page: 305 / 401

Vista 1 Digital Mixing System

GC Operation 4-129

Document generated: 18.04.17

SW V5.3

4.6.2.1.4

EQ/Dyn View

The EQ/Dynamics View option can be checked or unchecked. If

checked

, the

graphical controller will display an EQ and/or a Dynamics screen.

EQ Screen

The EQ screen is displayed for the channel on which any of the rotary

encoders is touched or operated while the channel’s controls are in the EQ/

Filter page. Please note that the EQ screen will appear when any EQ/Filter

control is touched. However, for the EQ screen to be displayed,

EQ/Filter

must be engaged

in the channel.

The EQ screen is time-limited and will automatically disappear several

seconds after the last touch, or when pressing

Esc

. It is always on top of any

other screens/pages.

Summary of Contents for Vista 1


















































































































































































































































































































































































































Search results

Summary of Contents for Vista 1

Reviews:

Related manuals for Vista 1

Brands by name

Popular brands

Studer Vista 1, Operating Instructions Manual

Search results

Summary of Contents for Vista 1

Reviews:

Related manuals for Vista 1

Brands by name

Popular brands