Studer Vista 1, Operating Instructions Manual

Page: 83 / 401

Vista 1 Digital Mixing System
Desk Operation 2-43
Document generated: 18.04.17 SW V5.3
As soon as the separate offset fader values differ from the main fader value,
this offset is indicated with a small “L”or”R” icon in the label area.
During this temporary action, the channels that are assigned to the Grand
Master Strips in the Strip setup, are currently not shown and cannot be oper-
ated for as long as the
CHANNEL VIEW
of a stereo channel is active. Since
this is major exception to the Vista operation concept – the
CHANNEL VIEW
key is flashing during this time.
The fader of the channel strip still controls the main fader level of the stereo
channel while the two offset fader values remain static.
Note :
The resulting fader level is :
Fader L = Fader Main + Fader Offset L
Fader R = Fader Main + Fader Offset R
Only stereo channels of VMC configs that are (re-) calculated with the V5.3
CoreCfgTool provide this feature. The process to recalculate existing configs
is as follows :
1. Open the existing .VMC file with the CoreCfgTool V5.3
2. Go to the channel/bus view and select the desired stereo channels
3. Double-click on the newly provided Library function “Split Fader Stereo”
4. Save the config with a new name and click “Generate All”
5. Load this config and create a new title or convert an existing title to the
new config.