Studer Vista 1 Operating Instructions Manual Download Page 309

Page: 309 / 401

Vista 1 Digital Mixing System

GC Operation 4-133

Document generated: 18.04.17

SW V5.3

4.7 Fourth level: SysAdmin functions

The SysAdmin (system administration) menu items are normally greyed out

within the console’s standard operating mode, because they are functions that

are only useful during building the console and setting it up for operation. The

SysAdmin menu items include various test and configuration possibilities that

are not required during normal operation.

Nevertheless, some of the SysAdmin functions will be explained here, since

they may be useful if the console is radically reconfigured, the monitoring or

signaling systems are expanded, or some detailed troubleshooting is required.

Activating SysAdmin Mode from Standard Mode

Click on the Log In icon in the Application menu. You will be asked to enter

the system administration Password. After completing that, all greyed out

SysAdmin menu items become accessible.

Once logged in, the Log In menu item automatically becomes the Log Out

function, which allows to leave the System Administrator mode again.

Here is an overview of all SysAdmin menu items, distributed over the four

main Ribbon Tabs (Tools, Settings, General Patch and Snapshot) :

Summary of Contents for Vista 1


















































































































































































































































































































































































































Search results

Summary of Contents for Vista 1

Reviews:

Related manuals for Vista 1

Brands by name

Popular brands

Studer Vista 1, Operating Instructions Manual

Search results

Summary of Contents for Vista 1

Reviews:

Related manuals for Vista 1

Brands by name

Popular brands