Studer Vista 1 Operating Instructions Manual Download Page 171

Page: 171 / 401

Vista 1 Digital Mixing System

Parameters 3-59

Document generated: 18.04.17

SW V5.3

When using the

fold

button to go back to the normal

CHANNEL VIEW

, the

trimmed input gains are kept and the main input gain control will then just

apply an offset to the individual gains. Any trimmed input legs are then listed

underneath the dB value. (As shown in the example above, where

and

are trimmed).

Also in the

CHANNEL VIEW

, there is an additional selection possibility in the

touch area that allows modifying the EQ and dynamics parameters indivi-

dually for the Front, Center, LFE and Rear signals.

Summary of Contents for Vista 1


















































































































































































































































































































































































































Search results

Summary of Contents for Vista 1

Reviews:

Related manuals for Vista 1

Brands by name

Popular brands

Studer Vista 1, Operating Instructions Manual

Search results

Summary of Contents for Vista 1

Reviews:

Related manuals for Vista 1

Brands by name

Popular brands